loading
About Richtek | Contact Us |

The RT9535A is a PWM switch mode battery charger controller to fast charge single or multiple Li-Ion, NiMH and NiCd batteries, using constant current or constant voltage control. Maximum current can be easily programmed by external resistor. The constant voltage output can support up to 22V with 0.5% accuracy.

A third control loop limits the input current drawing from the adapter during charging. This allows simultaneous operation of the equipment and fast battery charging without over loading to the adapter.

The RT9535A can charge batteries from 2.5V to 22V with dropout voltage as low as 0.4V.

The RT9535A is available in the WQFN-16L 4X4 package.

Applications

  • Notebook Computers
  • Portable Instruments
  • Chargers for Li-lon, NiMH, NiCd and Lead Acid Rechargeable Batteries
Key Spec.
RT9535A
Status NRND
Vin (min) (V) 4.5
Vin (max) (V) 28
Battery Charge Voltage (max) (V) 22
Battery Charge Current (max) (A) 2
Status Indicator No
Charger Type Switching
Input Source AC Adapter;USB
Features Adjustable Current Limit;Adjustable Soft-Start;Current Mode Control;Enable Input;OCP;SCP;UVP
Package Type WQFN4x4-16
Built-in Power MOSFETs Yes
Features
  • Fast Charging for Li-Ion, NiMH and NiCd Batteries
  • Adjustable Battery Voltages from 2.5V to 22V
  • High Efficiency : Up to 95%
  • Charging Current Programmed by Resistor
  • Precision 0.5% Charging Voltage Accuracy
  • Provide 5% Charging Current Accuracy
  • 500kHz Switching Frequency
  • Auto Shutdown with Adapter Removal
Additional Documents
Title Last Update ShareDownload
Power Management Components for Lithium-Ion Battery Powered Applications
鋰離子電池電源管理IC選擇指南 		2020/12/07
Please confirm with our distributor or sales representative for actual stock status.
TOP