loading

The RT8203 dual step-down, Switch Mode Power Supply (SMPS) controllers generate logic-supply voltages in battery-powered systems. The RT8203 include two pulse-width modulation (PWM) controllers, adjustable from 2V to 5.5V or fixed at 5V and 3.3V. These devices feature two linear regulators providing 5V and 3.3V always-on outputs. Each linear regulator provides up to 100mA output current with automatic linear regulator bootstrapping to the main SMPS outputs. The RT8203 include on-board power-up sequencing, a power good (PGOOD) output, internal soft-start, and soft-shutdown output discharge that prevents negative voltages on shutdown. RichTek's proprietary Mach-PWMTM "instant-on" response, constant on-time PWM control scheme operates without sense resistors and provides 100ns response to load transients while maintaining a relatively constant switching frequency. The unique ultrasonic mode maintains the switching frequency above 25kHz, which eliminates noise in audio applications. Other features include diode-emulation, which maximizes efficiency in light-load applications, and fixed-frequency PWM mode, which reduces RF interference in sensitive applications. The RT8203 provides a pin-selectable switching frequency, allowing either 200kHz/300kHz or 400kHz/500kHz operation of the 5V/3.3V SMPSs, respectively. The RT8203 is available in SSOP-28 package.

Applications

  • Notebook and Subnotebook Computers
  • PDAs and Mobile Communication Devices
  • 3- and 4-Cell Li+ Battery-Powered Devices
Key Spec.
RT8203
Status NRND
Recommended Alternative  RT8230A/RT8230B/RT8230C/RT8230D/RT8230E
Vs (typ) (V) 5
Vin (min) (V) 7
Vin (max) (V) 24
Vout (min) (V) 2
Vout (max) (V) 5.5
Output Adj. Method Resistor
Accuracy (+/- %) 1.5
Freq (typ) (kHz) 300;400
Freq (min) (kHz) 200
Freq (max) (kHz) 500
Iq (typ) (mA) 0.7
Ext Sync No
Features Adjustable Current Limit;Adjustable Frequency;COT Control;Cycle-by-Cycle Current Limit;Diode Emulation Mode;Enable Input;Force PWM;OVP;Power Good;SCP;UVP;Ultrasonic Mode Control
Package Type SSOP-28
Features
  • No Current Sense Resistor Needed
  • 1.5% Output Voltage Accuracy
  • 3.3V and 5V 100mA Bootstrapped Linear Regulators
  • Internal Soft-Start and Soft-Shutdown Output Discharge
  • Mach-PWM with 100ns Load Step Response
  • 3.3V and 5V Fixed or Adjustable Outputs
  • 7V to 24V Input Voltage Range
  • Ultrasonic Mode Operation 25kHz (min.)
  • Power Good (PGOOD) Signal
  • Over Voltage Protection
  • Under Voltage Protection
  • Over Temperature Protection
  • RoHS Compliant and 100% Lead (Pb)-Free
TOP