loading
Richtek
关于立锜 | 联络我们 |

The RT6166 is a high-efficiency, single-inductor and Advanced Constant On-Time (ACOT®) monolithic synchronous buck-boost converter that can deliver up to 3A output current from an input voltage range of 2V to 5.5V.It can regulate the digitally programmable output voltage from 1.8V to 4.975V, making it suitable for a wide range of input supply applications, regardless of whether the input voltage is lower, higher than, or equal to the output voltage. The ACOT® control architecture features outstanding line/load transient response, seamless transition between buck and boost modes, and provides stable operation with small ceramic output capacitors without the need for complicated external compensation.The RT6166 features an I2C interface for programmable output voltage, ultra-sonic mode control, VOUT DVS slew-rate adjustment, and device status monitoring.The target output voltage can also be switched through the external VSEL pin to perform DVS (Dynamic Voltage Scaling), and the ramp-up slew-rate and ramp mode of DVS can be set by configuring the related registers.The RT6166 operates with automatic PFM (Pulse Frequency Modulation) mode, featuring a low quiescent current design of typically 4μA, maintaining high efficiency during light load operation.At higher loads, the device automatically switches to a 2.2MHz fixed frequency control, effectively smoothing out the switching ripple voltage with small package filtering elements. The integrated low RDS(ON) power MOSFETs exhibit excellent efficiency under heavy load conditions. In shutdown mode, the supply current is typically 0.1μA, contributing to reduce power consumption. The PFM mode can be disabled if a fixed frequency is required. The RT6166 is housed in a compact WL-CSP-15B 1.4x2.3 (BSC) package.The recommended junction temperature range is -40°C to 125°C, and the ambient temperature range is -40°C to 85°C.

应用

  • Smartphones and Tablets
  • Portable Devices
  • Wearable Devices
  • System Pre-Regulators
  • Point-of-Load Regulators
  • Wifi Modules
  • USB VCONN Supplies
  • TWS Earbud Chargers
主要规格
RT6166A RT6166B RT6166C RT6166D
Status Active Active Active Active
Vin (min) (V) 2 2 2 2
Vin (max) (V) 5.5 5.5 5.5 5.5
Vout (min) (V) 1.8 1.8 1.8 1.8
Vout (max) (V) 4.975 4.975 4.975 4.975
Iout (max) (A) 3 3 3 3
Current Limit (typ) (A) 6 6 6 6
Freq (typ) (kHz) 2200 2200 2200 2200
Freq (min) (kHz) 500 500 500 500
Freq (max) (kHz) 3000 3000 3000 3000
Ron_HS (typ) (mOhm) 25 25 25 25
Ron_LS (typ) (mOhm) 38 38 38 38
Iq (typ) (mA) 4 4 4 4
Features ACOT Control;Cycle-by-Cycle Current Limit;Enable Input;I2C;OCP;OVP;SCP;UVP ACOT Control;Enable Input;I2C;OCP;OVP;Power Good;SCP;UVP ACOT Control;Enable Input;I2C;OCP;OVP;Power Good;SCP;UVP ACOT Control;Enable Input;I2C;OCP;OVP;Power Good;SCP;UVP
Interface I2C I2C I2C I2C
Package Type WL-CSP1.4x2.3-15(BSC) WL-CSP1.4x2.3-15(BSC) WL-CSP1.4x2.3-15(BSC) WL-CSP1.4x2.3-15(BSC)
关键特性
  • Automatic Seamless Mode Transition with Real Buck, Buck-Boost, and Boost Operation
  • Input Voltage Range: 2V to 5.5V
  • Output Voltage Range: 1.8V to 4.975V with Digitally Programmable Steps (25mV/steps)
  • Default Output Voltage Settings:
    ► VOUT = VOUT1 at VSEL = L
    ► VOUT = VOUT2 at VSEL = H
  • Maximum Continuous Output Current:
    ► Up to 2.5A for VIN ≥ 2.5V, VOUT = 3.3V
    ► Up to 3A for VIN ≥ 3V, VOUT = 3.3V
    ► Up to 2A for VIN ≥ 3V, VOUT = 5V
  • Up to 95% Efficiency (VIN = 3.8V, VOUT = 3.3V, ILOAD = 1A)
  • 3μA Non-Switching Low Quiescent Current
  • I2C Interface (up to 1MHz)
  • Allow Dynamically-Voltage-Scaling Control
  • Automatic PFM Mode and Forced PWM Mode Selection
  • Ultra-Sonic Mode Operation
  • Protections: OCP, UVLO, OTP, OVP, UVP
  • 15-Ball WL-CSP Package
库存实际状况请联系代理商或业务窗口
TOP